2 HEX Inverted Hollow Kingpin For Skate Trucks

• Lower than standard kinpins

• Lighter than standard kinpins

• Helps prevent catching on smith grinds

• How is it lower? The top piece is the washer and you don't have that extra length caused by the kingpin nut.

• 2 Kingpins, Washers, Nuts, and a hex tool are included with each set
• The truck shown in the image is not included. Only shown for example, representing the installed kingpin. 

Will they make my trucks lighter? Yes, if you have regular (not hollow) kingpins they will make each truck 4 grams lighter.

Do they work with other trucks? They will work with most trucks but depending on their baseplate design you might have use something to keep the nut from spinning.  So you may have to tighten or loosen your trucks to how you like them when they are not on the board. They do work best with trucks that already are designed for inverted kingpins, since inverted kingpin baseplates hold that nut in place so you can tighten and loosen the trucks on the board easily. If you use these with a truck that is not designed for it, then you can still make it work with your own modifications, or possibly take it to your local shop for help!

What size is the allen key? 5.5mm.
The replacement kingpins include the wrench or it  can be found at most hardware stores.

 Will they make my trucks lower? They will not make your actual trucks lower but they will lower the top of the kingpin so it won’t catch on grinds.